Status Operational Status

RAM Dock Kit 87138 Install

  • Last edited on

Parts

new-ram-dock-final.jpg

Installation

ramdockschematic2.png

  1. Connect the Hardwire Charger to the Molex To SAE Adapter using the flat marine connector.
  2. Connect the Hardwire Charger to the Power USB Dock and secure using the USB clamp.
  3. Connect the USB power supply cable to the USB connector on the Zonar harness and secure using the USB clamp.
  4. Connect the Molex To SAE Adapter to the 2-pin molex connector on the Zonar harness.
  5. Connect the 4-pin and 8-pin connectors on the Zonar harness to the V4 device.
  6. Proceed with installation.

Related articles