Device Front
 |
Power Button
- Power On/Off: Press and hold
- Sleep Mode: Press and release immediately
|
Back Button - Previous Screen |
Home Button - Return to Home Screen |
Eject Clasp - Lift the center to unlatch. Pull the center down to latch. |
RFID - Scan ID card or use for EVIR inspections |
Volume Control - Adjust sound |
Menu Button - View menu options for other functions available on the tablet, including settings and screen brightness |
Dock - Ensure the dock is clear of debris prior to docking |
Device Back
 |
Camera Lens w/ Flash - Used to take photos of defects and attach to an EVIR |
|
Flashlight - When activated on the Connect screen, the flashlight LED will illuminate |
Back of Docking Station - Standard mounting screw configuration |
|
Device Side
 |
Reset Button - Use when directed by Customer Support |
SD Card Slot - Load application and firmware. Can also save pictures to an SD card |
Micro USB - Used to charge the Connect when off the dock |
USB Port - Used to download driver logs to a USB drive when necessary |
Headphone Jack - Standard 3.5mm headphone jack |
Logging In
 |
Power on the tablet. When the login screen is displayed, scan your ID card or type your ID in the field. Then tap the PIN field and enter your pin. Once entered, tap Log In. If you are part of a team of drivers, the co-driver can be logged in through the Driver Management screen once you are logged in. |
Home Screen
 |
Application Tiles – Each tile represents an application that is installed on the tablet. Tapping a tile will open the application. Additional tiles may be available by tapping the > symbol to the right of the screen. |
Driver – In the upper right corner, the active driver’s name is displayed. To change drivers or to Log Out, tap the name. |
Notification Bar – The notification bar displays the date, time, battery, and connection status. Application warnings and other alerts and information are also displayed here. |
Note: To see what each notification means, tap and hold the top of the screen and then drag all the way down. This will open the notification window and will explain each of the displayed icons. |
All Apps Menu
 |
Tapping the All Apps Menu icon in the bottom bar will give you access to other applications and tools, including Connect Help for each application, Connect Quick Tips and User Guide. Tools available through the All Apps menu:
- Calculator
- Camera, Gallery – Take and access photos taken with the tablet, including photographed defects during an
- Clock – The tablet clock is set based on the GPS unit in the asset. However, the clock includes the ability to set
- Browser – When connected to WIFI, you can browse the
- Settings – Configure and set preferences for the tablet, including: Sounds, WIFI, Display, Language, Brightness,
|
Help Screen
 |
To access the tablet User Guide, Quick Tips, and Application Specific help, tap the Tools button on the tool bar, then tap the Help icon.
Alternatively, anytime you are in an application, pressing the hard menu button will make the help icon available.
Each of the help sections goes further into detail on the tablet or a specific application and provides tips and task-based guides. |
Additional Help: From the home screen of the tablet: tap Tools » Help and select the desired topic.