Alert Types

Sends an alert when the vehicle ECM generates a fault code. The alert includes the fault code as well as descriptive information. Choose one of two categories to receive alerts on:

• Stop Engine Lights
• Stop, Check Engine, and MIL Lights

Driver initiated request to record current events:

• Generates Z Alert when button is pressed

A camera has detected the driver is drowsy.

This alert requires an internal facing camera

An EVIR defect was logged. Choose severity threshold

• Critical Events - Major defects only
• Minor + Critical Events - Major and minor defects

Threshold options:

• Critical Events - Asset is 7 days from their compliance deadline and not compliant
• Minor + Critical Events - Asset is 30 days from their compliance deadline and not compliant

Optional alerts

• Send an alert when an asset is no longer compliant
• Send an alert when a scan fails compliance check
• Send an alert when a scan errors

Sends an alert when an electric vehicle's (EV) battery drops below a certain level. Choose one of two thresholds:

• When stage of charge goes below 20 percent
• When stage of charge goes below 30 percent

Compatible EV Models

• Thomas Built Jouley
• Lion Electric LionC
• Blue Bird Vision
• Blue Bird All American
• IC Bus Electric CE
• Freightliner eCascadia

Sends an alert when the TCU detects that the vehicle battery has dropped below a certain threshold. Choose one of two thresholds:

• Battery below 11.50 volts
• Battery below 11.75 volts

Acceleration data indicates a collision may have happened

This alert requires a Zonar Dashcam

Asset has idled beyond company set threshold:

• Critical idle

Required pre-trip inspection was not performed.

Speeding event detected above the posted speed limit and company threshold setting:

• Critical Events - Asset was speeding with critical severity over the posted speed limit and company threshold
• Minor + Critical Events - Asset was speeding with minor or critical severity over the posted limit and company threshold

Acceleration data indicates a rollover event may have happened

This alert requires a Zonar Dashcam

Sends an alert when the TCU detects that the vehicle has moved a certain distance.

This alert will always trigger when the selected vehicles have moved unless you add a custom schedule (see Alert Management for more information).

There is only one threshold required for this alert:

• Alert after asset has driven # miles:
  • Set to 0 to send an alert as soon as the vehicle powers up.
  • Set to 1-9 to send an alert after that many miles. The maximum number of miles you can set is 9.

Compatible TCU Models

• V4 family
• Zonar LD
• V3 family (with 4G converter installed)

Assets tracked by Ztrak are not compatible with this alert.