The Alert tool allows for several types of alerts. When creating an alert in Alert Management, choose from one of the following types.
Diagnostic Code
Sends an alert when the vehicle ECM generates a fault code. The alert includes the fault code as well as descriptive information. Choose one of two categories to receive alerts on:
- Stop Engine Lights
- Stop, Check Engine, and MIL Lights
State of Charge (Electric Vehicle)
Sends an alert when an electric vehicle's (EV) battery drops below a certain level. Choose one of two thresholds:
- When stage of charge goes below 20 percent
- When stage of charge goes below 30 percent
Compatible EV Models
- Thomas Built Jouley
- Lion Electric LionC
- Blue Bird Vision
- Blue Bird All American
- IC Bus Electric CE
- Freightliner eCascadia
Equipment Battery Level
Sends an alert when the TCU detects that the vehicle battery has dropped below a certain threshold. Choose one of two thresholds:
- Battery below 11.50 volts
- Battery below 11.75 volts
Unauthorized Vehicle Movement
Sends an alert when the TCU detects that the vehicle has moved a certain distance.
This alert will always trigger when the selected vehicles have moved unless you add a custom schedule (see Alert Management for more information).
There is only one threshold required for this alert:
-
Alert after asset has driven # miles:
- Set to 0 to send an alert as soon as the vehicle powers up.
- Set to 1-9 to send an alert after that many miles. The maximum number of miles you can set is 9.
Compatible TCU Models
- V4 family
- LD TCU
- V3 family (with 4G converter installed)
Assets tracked by Ztrak are not compatible with this alert.