The Inspection Sequencing Report will display whether or not the operator(s) have performed their inspections in a specific sequence based on the scanning of zones 1 through 11. To access the Inspection Sequencing Report, from the main menu click Reports, then go to EVIR Inspection and click Inspection Sequencing.
- Use the filters to set the desired Inspection Type and Date Range.
- Click Apply to view the report.
Â
| Inspection Type | Displays the inspection configuration performed. |
| Asset | The asset associated with the asset tag read during the inspection. |
| Inspection # | Sequential number unique to the report as displayed. |
| Operator | Displays the inspector’s ID read from the conducted inspection. If the inspection was performed using a tablet and a team is logged in, this will be the operator logged in or specified when the inspection was performed. |
| Inspection Date | Displays the date when the inspection was performed. |
| Zone Scanned | Based upon the configuration, different colors will be displayed in the order that the operator performed the inspection from zones 1 through 11. This will help determine a pattern within the inspection performed by the operator. |