| Report Category | Report Type | Report Summary |
| Basic Reports | Advanced Summary Report | Lists total Drive, Idle and Stop time, # of Stops, Average Stop Time, # of Idles, Average Idle Time, Start Odometer, End Odometer and Distance. |
| Detailed Report | List of the individual readings from the device for the date range and time span specified. Each entry shows Time & Date, Driver, Address, Speed, Posted Speed, Direction, Event, Signal (strength), Latitude/Longitude and Odometer. Due to the volume of data produced, GPS Trackit does not recommend viewing this report for more than one unit and one day at a time. |
| Driver Mileage Summary Report | Total Mileage Accumulated by Drivers Over Designated Date Range. |
| Hours of Use Report | Provides the First On, Last Off, Machine Hours, Working Hours, Weekend Hours, Billing Hours and Overtime Hours. |
| Mileage Report | Details how mileage increased with each reading, shows both the mileage accumulated between readings as well as the total distance increases and the mileage accumulated for each day. |
| Mileage Summary Report | Total mileage accumulated each day. |
| Simple Report | List of the individual readings from the device for the date range and time span specified. Each entry showing Time & Date, Address, Distance, Speed, Posted Speed and Event. |
| Smart One C Utilization Report | For Smart One C units only. Organized by unit. Label, Tags, Engine Running Time, Engine Running Time (hours), Engine Running Time (%), Engine Off Time (Hours), Engine Off (%). |
| Speed Report | Details the dates, locations, and times when a specified speed was violated and/or when the posted speed limit is violated by a specified amount. Set filters to determine which speeding events are displayed. |
| Summary Report | Provides a sum of Engine On, Engine Off, Travel Time, Distance, Idle Time, Max Speed and Average Speed for the date range selected. |
| Utilization Report | For each device selected shows the total distance traveled, engine run time, idle time, stopped time, percentage of time moving, days worked, total days in range selected, and percentage of days worked. |
| Diagnostic Reports | Diagnostic Indicators Report | List of potential warning lights that *could* happen to vehicles (low tire pressure, check engine, etc…). Only available for certain plug-in units. |
| Diagnostic Parameters | Current feedback from diagnostic sensors on the vehicles, ie current battery voltage. Only available for certain plug-in units. |
| JB Summary Report | Broken down by Vehicle, shows Eng Average Fuel Eco (mpg), Eng Total Fuel Used (gal), Eng Total Hours, Eng Total Idle Fuel (gal), Eng Total Idle Hours, Hi-Rez Total Fuel (gal), Total PTO Hours, Total Vehicle Hours. |
| JB Diagnostics Report | Shows specific Diagnostic readings for: Accel Pedal Position, Battery Voltage, Brake Pedal Position, Eng Coolant Pressure, Eng Coolant Temp, Eng Fuel Rate, Eng Oil Level, Eng Oil Pressure, Eng Oil Temp, Fuel Level 1, Fuel Level 2, Odometer, RPM and Seat Belt Switch. Readings broken down by Vehicle and reported every 10 minutes. |
| JB DTC Report | List of DTC codes detected via a JBUS device. |
| Driver App Reports | Chat History Report | Chat history between Driver and Dispatch. Organized by Driver. |
| Combined Report | Driver Status changes, Time Clock punches, Chat History, Stops, Current Stop Statuses. |
| Driver Forms Report | Completed Forms submitted by Drivers via the Zonar Ignition Driver application. |
| Form Stop Summary Report | Date/Time, Vehicle Event, Address, Duration, Form Questions and Answers. |
| Stop History Report | Date/Time, Address, Stop Title, Current Status and Trip Duration. |
| Stop Summary Report | Organized by Driver, Date and Stop: Total Stop Duration, Time & Date, Address, Status and Duration. |
| Timecard Report | Time Clock punches from Driver via the Zonar Ignition Driver application, organized by date, includes location of phone/tablet, total time. |
| Event Reports | Activity Report w/Hour Meter | Engine Hours broken down by Idle versus Move, Shows Duration for event along with Location and Start Date/Time, provides running hour meter showing the increase of hours corresponding to engine usage. |
| Driver Safety Report | Lists Hard Turn, Hard Brake, Rapid Acceleration. Each entry includes Time & Date, Driver, Address, Speed, Posted Speed, Direction, Event and Signal. |
| Event Report | Provides a list of specific Events for the Date Range and Devices/Drivers selected. Use the Event Filter to show only selected events. |
| Idle Report | Shows Idle events. Use the Idle Minutes Filter to show idle events lasting over a specified amount of time. |
| Ignition Report | Shows each Ignition On and Ignition Off events. Includes Dates, times, Addresses and duration of the event, along with a daily total of Ignition On and Ignition Off time. |
| Input Report | History of Input feedback. When and where Inputs were engaged, which Inputs were engaged, total number of times engaged, and total time engaged. |
| Moving Report | Shows data for each Travel Start to Travel Stop. Shows address of origin and destination, start and stop times, total travel time. Broken down by day. Can be filtered to eliminate events below a certain duration. |
| Start Stop Idle Report | Organizes readings from engine on to engine off. Shows total Engine On, Engine Off, Idle and Travel Times for the date range selected. Also shows Total Distance, Max Speed and Average Speed. In addition to the overall totals, each event is detailed by the information above as well. |
| Stop Report | Lists the Stops for each day with Address, Time & Date and Duration. Indicates time Idle versus time Engine Off. Use the Stop filter to only show stops lasting over a number of minutes. |
| Timesheet Report | Provides the date, time, and address for when the engine first turned on for the day (First Ignition On Time) as well as the date, time, and address for when the ignition last turned off for the day (Last Ignition Off). It also provides the total time elapsed between the first engine on and the last engine off events and total distance traveled each day. |
| Trip Report | Shows the Trip details from when the ignition is turned on to when it turned off, including the departure and arrival addresses. It provides totals for driving time, stopped time and idle time within the selected date range, along with overall daily totals. |
| Location Reports | Geofence Based | Details units that entered/exited Geofence, total duration and distance within Geofence. |
| Geofence | Provides a list of Geofence Events for each vehicle, including the Event, Geofence Name, Address, Tags, Time & Date, Time and Distance. |
| Landmark Based Report | Shows which Units Entered and Exited each Landmark, the Duration within the Landmark and Time within the Landmark. |
| Landmark Crew Report | Details any Landmarks visited by assigned Crews. Shows Time & Date, Landmark, Driver, Crew Member, Crew Total time in Landmark and Vehicle Total Time in Landmark. Organized by Unit. |
| Landmark Engine Hours Report | Summarizes how many times a vehicles visited particular Landmarks, including Total Visit Duration and Engine Hours, organized by unit. |
| Landmark Report | Show the Landmarks visited by each vehicle, including Entry and Exit times, Distance traveled within and between Landmarks, the Duration within and between Landmarks. |
| Landmark Summary | Summarizes how many times a vehicle visited particular Landmarks, including Total Visit Duration and Engine Hours. |
| Lat/Long Report | Provides the Latitude and Longitude for each reading along with the Event, Time, Date and Address. |
| Location Report | History for changing Vehicle Location assignments. |
| State Mileage Crossings | Provides additional data regarding State Mileage including the number of border crossings along with the location and date/time of the crossings. Can be used to assist with IFTA reports. |
| State Mileage Report | Shows the miles accumulated per state per vehicle over date range selected, including number of state border crossings and odometer readings. Can be used to assist with IFTA reports. |
| State Mileage Summaries | Summarizes State Mileage data showing the mileage each vehicle accumulates in each state over the date range selected. Can be used to assist with IFTA reports . |
| Maintenance Reports | Vehicle Maintenance Items Report | Details Services completed for vehicles within the requested date range including the Time & Date, Service Title, Amount of Mileage, Days, Hours, Total Cost, and any notes entered when the service was completed. |
| Vehicle Service Items Report | Shows a breakdown by Service Item for all services completed that included that item. Shows the total cost for all services that included that maintenance item. Displays the Service Name, Time & Date, Cost, and Service Notes. |
| Other Reports | Alert Log | Organized by Vehicle and Day, shows any Alerts triggered, including Time & Date, Address, Driver, Contacts, Alert Type and Alert Detail. |
| Behavior Report | Metrics for Behavior events and resulting Risk Factor within the date range selected. Lists number of Aggression, Vehicle Speed and Speeding Over Posted violations. If VidFleet Cameras are in use, Driver Monitoring System (DMS) and Advance Driver Assistance System (ADAS) elements will be included as well. Only available as a Scheduled Report. |
| Device Summary Info Report | For Smart One C units only. Tag, Unit Label, Unit SN, Notes, Engine Hours Total, Engine Running Time (hrs), Current Address, # of Days at Current Address, Previous Address, Last Event Time. |
| Driver Timesheet | Breaks down by Driver to show Vehicles assigned and assignment history. Must utilize the Driver tool. |
| Engine Hours Report | For Smart One C Units only. Organized by Unit, provides Total Days, Total Hours and Average Hours for the Range selected. Time & Date, Location and Hours. |
| Fuel Card Report | Detailed fuel card transactions. Only available with Wex Fuel Card and Car IQ Pay integrations. |
| Fuel Level Report | Vehicle fuel level report in percentage. |
| Miles Per Gallon Report | Shows fuel consumption in miles per gallon. |
| Non Reporting | Lists vehicles that haven’t reported within the chosen date range, includes the unit Tag(s), last recorded address and the date/time of the last recorded reading. |
| Odometer | Give the current odometer reading for the vehicle, organized by group. |
| Ping | Manual request of unit position (asset tracker) using the Locates features on the Status tab, report shows manual requests sent. |
| Temperature | Organized by Unit, shows historical temperature data for the date range selected. |
| Unit Info | Organized by Tag, gives Type of Unit, Unit Serial Number, Garmin Serial Number (if applicable), Unit Label, Timezone, Driver, Odometer, Engine Hours, Equipment, VIN, Last Event and Last Event Time. |
